Product Details
Pneumatic angle seat valve 120 series screw welded tri-clamp connection
In the non-working state, due to the action of spring force, the valve is often closed (open). The valve opens (closes) when the actuator piston is acted upon by compressed gas. Dual - acting mode with compressed gas control valve on and off.
characteristics
1, the lower seal structure can reduce the residual and easy to clean.
2, the flow is large, with a little flow resistance, and no water hammer.
3, Y-type design, increase the 30% flow.
4, ultra-long service life. stem automatic correction, self-lubrication, maintenance free
5, the cylinder is made of stainless steel, which perform well in bad environment, and 360° rotation.
application
Beer and beverage, printing and dyeing, air separation, pharmaceutical, filling, chemical, sterilization, foam plastic equipment, environmental protection, etc.
Technical parameters
Working pressure: 0-16bar(232psi)
Control pressure: 3-8bar(43.5-116psi)
Control medium: clean compressed air or neutral gas
Body material: CF8M/CF8
Seal material: PTFE
Cylinder material: CF8(28mm-90mm cylinder), AL(125mm cylinder)
Cylinder size: 28mm, 40mm, 50mm, 63mm, 90mm, 125mm
Applicable medium: water, alcohol, oil, fuel, steam, neutral gas or liquid, organic solvent, acid and base solution
Viscosity of medium: Max 600mm²/s
Medium temperature: -10℃ — +180℃(PTFE normal temperature type)
+25℃ — +220℃(PTFE high temperature type)
Ambient temperature: -10℃ — +80℃
Control mode: single acting normally closed, normally open, double acting normally closed, double acting free state
Connection type: Thread type, ASME BPE welding type, ASME BPE quick packing type, flange type
Leakage class: DIN EN 12266 A class
Product specification
1. Thread Type
SIZE |
ACTUATOR (mm)
|
Q |
(PC |
R |
K |
A |
Kv (m3/h) |
G |
T |
L |
sw |
DN8 |
28 |
M5 |
42 |
20 |
110 |
117 |
1.8 |
1/4" |
12 |
65 |
27 |
40 |
1/8" |
50.5 |
27 |
125 |
131 |
2.2 |
50 |
1/8" |
60 |
33 |
139 |
143 |
DN10 |
28 |
M5 |
42 |
20 |
110 |
117 |
2 |
3/8" |
14 |
65 |
27 |
40 |
1/8" |
50.5 |
27 |
125 |
131 |
3.9 |
50 |
1/8" |
60 |
33 |
139 |
143 |
DN15 |
28 |
M5 |
42 |
20 |
110 |
117 |
2.2 |
1/2" |
16 |
65 |
27 |
40 |
1/8" |
50.5 |
27 |
125 |
131 |
4.3 |
50 |
1/8" |
60 |
33 |
139 |
143 |
DN20 |
50 |
1/8" |
60 |
33 |
141 |
146 |
7.6 |
3/4" |
18 |
75 |
32 |
DN25 |
50 |
1/8" |
60 |
33 |
145 |
155 |
15.8 |
r |
20 |
90 |
40 |
63 |
1/8" |
75 |
41 |
167 |
177 |
DN32 |
63 |
1/8" |
75 |
41 |
180 |
193 |
26.0 |
1 1/4" |
22 |
110 |
50 |
90 |
1/8" |
106 |
55 |
227 |
235 |
DN40 |
63 |
1/8" |
75 |
41 |
180 |
197 |
32.0 |
1 1/2" |
24 |
120 |
56 |
90 |
1/8" |
106 |
55 |
228 |
239 |
DN50 |
63 |
1/8" |
75 |
41 |
187 |
215 |
52.0 |
2" |
26 |
150 |
69 |
| 90 |
1/8" |
106 |
55 |
235 |
258 |
125AL |
1/4" |
170 |
85 |
300 |
312 |
2. Welded Type
SIZE |
ACTUATOR (mm) |
Q |
(PC |
R |
K |
A |
Kv (m3/h) |
L |
H |
ASME BPE |
OD |
s |
DN15 |
28 |
M5 |
42 |
20 |
112 |
143 |
1.3 |
135 |
30 |
12.7 |
1.65 |
40 |
1/8" |
50.5 |
27 |
127 |
155 |
1.7 |
50 |
1/8" |
60 |
33 |
140 |
166 |
DN20 |
50 |
1/8" |
60 |
33 |
138 |
170 |
5.8 |
145 |
30 |
19.05 |
1.65 |
DN25 |
50 |
1/8" |
60 |
33 |
146 |
176 |
11.8 |
152 |
30 |
25.4 |
1.65 |
63 |
1/8" |
75 |
41 |
168 |
200 |
DN40 |
63 |
1/8M |
75 |
41 |
177 |
216 |
20.6 |
182 |
30 |
38.1 |
1.65 |
90 |
1/8- |
106 |
55 |
225 |
258 |
DN50 |
63 |
1/8- |
75 |
41 |
187 |
228 |
55.7 |
210 |
30 |
50.8 |
1.65 |
90 |
1/8H |
106 |
55 |
235 |
270 |
125AL |
1/4" |
170 |
85 |
300 |
325 |
DN65 |
90 |
1/8" |
106 |
55 |
286 |
297 |
71.6 |
230 |
26 |
63.5 |
1.65 |
125AL |
1/4" |
170 |
85 |
338 |
337 |
DN80 |
125AL |
1/4" |
170 |
85 |
355 |
380 |
105.2 |
310 |
26 |
76.2 |
1.65 |
3. Ready-package Type
SIZE |
ACTUATOR
(mm)
|
Q |
(DC |
R |
K |
A |
Kv (m3/h) |
L |
ASME BPE |
|
OD |
OB |
Od |
H |
DN15 |
28 |
M5 |
42 |
20 |
112 |
145 |
1.3 |
130 |
25 |
12.7 |
9.4 |
30 |
40 |
1/8" |
50.5 |
27 |
127 |
158 |
1.7 |
50 |
1/8" |
60 |
33 |
140 |
169 |
DN20 |
50 |
1/8" |
60 |
33 |
138 |
172 |
5.8 |
150 |
25 |
19.05 |
15.75 |
30 |
DN25 |
50 |
1/8" |
60 |
33 |
146 |
180 |
11.8 |
160 |
50.5 |
25.4 |
22.1 |
30 |
63 |
1/8" |
75 |
41 |
169 |
205 |
DN40 |
63 |
1/8" |
75 |
41 |
177 |
225 |
20.6 |
200 |
50.5 |
38.1 |
34.8 |
30 |
90 |
1/8" |
106 |
55 |
225 |
267 |
DN50 |
63 |
1/8" |
75 |
41 |
187 |
238 |
55.7 |
230 |
64 |
50.8 |
47.5 |
30 |
90 |
1/8" |
106 |
55 |
235 |
280 |
125AL |
1/4" |
170 |
85 |
300 |
335 |
DN65 |
90 |
1/8M |
106 |
55 |
286 |
327 |
71.6 |
290 |
77.4 |
63.5 |
60.2 |
26 |
125AL |
1/4" |
170 |
85 |
337 |
368 |
DN80 |
125AL |
1/4" |
170 |
85 |
349 |
383 |
105.2 |
315 |
91 |
76.2 |
72.9 |
26 |
*Note: above size is the design size of rough (the actual size may be discrepant, for reference only).
FAQ:
1.Q: Can we visit your factory before place the order?
A: Yes,Very welcome that must be nice to set up good relationship for business.
2.Q：Can we be your agent?
A: Yes, welcome to cooperation with this. We have big promotion in the market now. For the details please contact with our overseas manager.
3.Q: Would you have a discount if l have a large order?
A: Yes we could offer different discounts according to your order quantity.
4.Q: If l don't know what kind of product I need, what should I do?
A: Just take it easy, you just need to provide us "working pressure", "temperature" and "media."Then, we can suggest the most suitable product to you, or we provide you our e-catalog for your reference, you choose the suitable model, you only need to tell us the model number.
http://www.cx-jos.com/
Company Profile
